| Image |
Description |
Price |
|
 |
#11 Hobby Blades, Box of 100
Box of 100 blades. May not be X-Acto brand due to the increasing cost of X-Acto.… |
$17.50
|
|
.jpg "Paint Mixer") |
Paint Mixer
Battery operated (batteries not included) paint mixer. Small enough to mix paint in small jars or tins. Ideal for mixing Humbrol, Aeroglos…OUT OF STOCK |
$10.55
|
|
 |
Jones Balsa Stripper
This is the original Jones Balsa Stripper. Strips from .010 inch to 1/8 inch. This is the stripper that has become the standard.… |
$59.50
|
|
 |
Field Box
This is a compact flight box with detachable sides. It was designed by Jerry Small.
Jerry Small is always thinking of ways to build a bet… |
$35.00
|
|
|
#11 Hobby Blade - Pkg. of 10
Package of 10 blades -- #11. Blades are in a tube and not loose.… |
$3.00
|
|
.jpg "Boehm Vacuum Former") |
Boehm Vacuum Former
Mr. Chris Boehm makes these vacuum formers. Simple to operate. Use your own household vacuum cleaner. Works great for making -- cano… |
$60.00
|
|
 |
CG Balancer
This tool allows you to check and set your CG accurately. It can be broken down to a smaller package for easy transportation. … |
$35.00
|
|
 |
Blast Tubes
Set of three blast tubes and wires. Sizes are 3/8", 1/2", and 3/4". Great for using while winding your rubber motor. … |
$7.50
|
|
.jpg "Rees Winder") |
Rees Winder
This is a 10:1 winder formerly produced by Dave Rees and HiLine Models. Shorty's Basement has purchased this product and will continue to pr… |
$75.00
|
|
 |
Replacement Blades - Jones Balsa Stripper
Pile wire blade with a custom ground tip… |
$1.75
|
|
 |
Single Edge Blades
These top quality blades fit most major brand retractable and nonretractable utility knives. High carbon surgical steel construction for removin… |
$5.00
|
|
 |
Up-Right
This is a 90 degree alignment jig that makes model building easy. For use on bulkheads, horizontal tail, vertical tail, fuselage sides. Ca… |
$1.49
|
|
 |
1" Tuf-Grind (pkg of 2)
Reinforced to prevent breakage and shattering. Strong enough to cut and grind just about anything - steel, fiberglass, plastics, wood, and so on… |
$4.99
|
|
 |
2" Tuf-Grind Combo
Reinforced to prevent breakage and shattering. Strong enough to cut and grind just about anything - steel, fiberglass, plastics, wood, and so on… |
$4.99
|
|
 |
2" Tuf-Grind
Reinforced to prevent breakage and shattering. Strong enough to cut and grind just about anything - steel, fiberglass, plastics, wood, and so on… |
$3.99
|
|
 |
Mandrel Assembly
This is a heavy duty mandrel assembly for holding the Tuf-Grind grinding wheels to your cutting tool (Dremel).… |
$2.49
|
|
 |
Hobel Razor Plane
Softwood Plane for use with surfaces, straight and angled edges, ledges, etc. Comes with 5 blades.… |
$12.50
|
|
.jpg "Hobel Replacement Blade") |
Hobel Replacement Blade
HOBEL-Blade for use with Hobel Razor Plane
Thickness: 0.30 mm
… |
$1.00
|
|
.jpg "THE NOTCHER") |
THE NOTCHER
With "THE NOTCHER", you can easily sand 1/16", 3/32", and 1/8" wide notches and adjustable depths to over 1/4" with the … |
$15.00
|
|
Your basket is empty.
